A)  Seam Overlap: this area will be covered by the overlapping film from the opposite side of the sleeve. This area 3mm is to be glued.

B)  Unseamed Width: The flat, unseamed web width of the film =   Layflat Size*2 + A= 87*2 + 3 = 177mm

C)  Cut length: 2mm area of clear at the top and bottom of the sleeve and total length is 101+2.5+2.5=106mm.

D)  Clear Area: In order for the sleeve labels to be cut from the rolls on which they are produced, there must be a clear area between each repeat label on the roll. The resulting 5mm of clear space between each repeat allows the sleeves to be cut accurately.

E)  Layflat Size: This is the finished width of your sleeve after it is A seamed. There is place where the sleeve will be folded--not showed.. These folds can be moved horizontally across the sleeve. It will be depended on where the figutre to printed on label. 

 

If you need more information about real practice, welcome to contact us

More video:
https://www.youtube.com/@dase-singpackagingtechnolo8451

Contact us:
matt@dasesing.com